lrc ? connectors 76 thomas & betts corporation/cable communications division tel: 800-920-0328 / 901-252-5150 ? fax: 800-283-6756 / 901-252-1380 spe cifications subject to change. dimensions shown are for reference only. dimensions are in inches. ordering information: male to female (fig. a) part dim a number inch [cm] j11ksmf15 16.95 [43.00] j11ksmf25 26.60 [67.60] j11ksmf30 31.45 [79.90] j11ksmf40 38.70 [98.30] j11ksmf50 50.80 [129.00] j11ksmf65 62.90 [159.75] j11ksmf75 75.00 [190.50] j11ksmf85 87.10 [221.20] j11ksmf100 99.20 [251.95] j11ksmf140 147.55 [374.80] J11KSMF160 166.90 [424.00] j11ksmf220 224.95 [571.40] j11ksmf360 360.45 [915.55] j11ksmf1800 1802.15 [4577.50] ordering information: male to male (fig. b) part dim a number inch [cm] j11ksmm15 13.80 [35.00] j11ksmm25 26.00 [66.00] j11ksmm30 30.75 [78.10] j11ksmm40 38.00 [96.50] j11ksmm50 50.10 [127.25] j11ksmm65 62.20 [158.00] j11ksmm75 74.30 [188.70] j11ksmm85 86.40 [219.50] j11ksmm100 96.00 [243.80] j11ksmm140 146.90 [373.00] j11ksmm160 166.20 [422.20] j11ksmm220 224.30 [569.70] j11ksmm360 359.70 [913.55] j11ksmm1800 1801.50 [4575.70] fig. a fig. b flexible cable adaptors thomas & betts lrc flexible cable adaptors replace rigid housing adaptors connecting hardline cable to equipment in pedestals and other limited access areas. design fea- tures include a swivel front end for ease of installation, jam nut for securing the male connector in posi- tion, an auto seizing mechanism for pin termination and retention and is weatherproof. the connector to cable interface utilizes thomas & betts lrc's patented snap-n-seal ? connector technology. f eatures /s pecifications ? 5/8" -24 male/female interface com- plies to scte ips-sp-500 and ips-sp- 501. ? auto seizing mechanism (female) for pin termination and retention. ? cutting guide (female) assures accu- rate pin length preparation. ? 11 series cable (commscope #5901) for superior electrical and mechanical performance. ? lengths are available from one to eight feet (nominal), in one foot increments. exact lengths vary to provide maxi- mum return loss performance. custom lengths available. ? part numbered for easy identification. ? impedence: 75 ohms ? return loss: -28 db minimum to 1 ghz. ? insertion loss: .3 db or better to 1 ghz. ? shielding effectiveness: -90 db typical. ? current rating: 25 amps at 25? c tem- perature rise above ambient tempera- ture of 24? c. ? cable retention: exceeds yield strength of cable. c omm s cope is a registered t rademark of c omm s cope , i nc . of n orth c arolina
|
